Having a wood burner warming a single room can still reduce heating bills as you possibly can turn off the central heating on this room, or turn it off in the remaining of the home when you’re spending time within the room with the log burner.
One other advantage of the wood burner, Mr Hill added, is that it gives you “energy independence” by supplying you with a heating option in case of power cuts.
“There’s also the sense of general well-being, sitting along with your family around the hearth, perhaps with a glass of wine,” he said.
Learn how to get essentially the most out of your log burner
Whether or not buying a burner finally ends up being a shrewd investment can boil right down to how well you employ it.
Retailer Stove Sellers recommends the next suggestions to enhance the efficiency of your stove:
1. Get the chimney right
The chimney is an important a part of the general wood burning stove system. It must be at the least 2ft taller than the roof, however the stove pipe must be kept to lower than 7ft with not more than two bends (or “elbows”).
If it’s longer or more convoluted than that, the smoke can cool an excessive amount of before it gets to the chimney, which might cause soot and other materials to gather. If left for too long, this might lead to a blockage.
2. Keep the chimney clean
A blocked chimney is one in all the key the explanation why a stove doesn’t work at its best possible.
Chimneys are designed for smooth airflow, and a heavy layer of deposits on the within wall will disrupt the air and be certain that your stove isn’t as efficient because it could possibly be.
3. Take into consideration positioning
If you wish to heat the entire house and your water supply then ensure your stove is near the centre of the home for essentially the most efficient heating.
A wood burning stove works best in an open-plan house, and though it could be a step too far to remove interior partitions to profit from your heating system, it might be price making an allowance for for those who’re moving and know you desire to a wood burning stove in your recent home.
4. Use dry wood
Low-cost wood may appear to be a bargain, but it may be a false economy if it has a high moisture content that causes a whole lot of smoke and never enough fire.
Aim for wood with a 15-20pc moisture content and also you’ll use less and get a greater burn that gets you warmer, faster, and for longer. Expect one split log to last an hour, as a rough approximation.
Check your chimney; if every little thing is working well it is best to not see smoke. If it smokes for greater than 20 minutes then there may be likely an issue with the fuel or something elsewhere within the system.
5. Use the ‘top down’ lighting method
Take several logs and kindling to create a layered “cage” around screwed-up newspaper or firelighters. This permits the warmth to flee and creates a draft within the chimney that can help feed the hearth.
Keep the air control fully open at this point, and leave the door barely ajar, then light the paper or lighters from the highest and let the flame descend and catch the kindling.
6. Wait, don’t just throw on logs
After 45 minutes to an hour, whenever you’re left with glowing embers, that’s the time so as to add more wood, after raking the embers to the front. Use just as much wood as you would like, whenever you need it, for essentially the most efficient fire.
Regulate the air control once the brand new logs have caught fire to make sure the cleanest possible burn.
7. Make certain it’s cold outside, or warmer inside
You possibly can’t control the weather, but a wood burning stove works higher when there’s a bigger temperature difference between the inside and outside, because the draft is an important a part of the operation.
For those who run the stove on a hot day then the air inlets may shut down, which shouldn’t be good for the chimney.
Why are wood burners controversial?
Home heating with solid fuels like wood is now estimated to be one in all Britain’s primary sources of nice particulate matter pollution.
The largest offender is PM2.5, which might work its way deep into the body via the bloodstream, and has been linked to a spread of severe health issues including heart disease, strokes, asthma and cancer. Wood burning is accountable for around 17pc of the pollutant, in keeping with statistics from the Department for Environment, Food and Rural Affairs (Defra).
A 2022 study from Professor Chris Whitty, the chief medical officer for England, found that even “eco design” wood burning stoves produced 450 times more toxic air pollution than gas central heating, while older stoves – now banned from sale – produced 3,700 times more.
To chop your emissions, it is best to ensure that any wood you propose to make use of in your stove has the “Able to Burn” label on it – this confirms it has a moisture content of lower than 20pc, and meets sulphur and smoke limits.